The 66th meeting of the Confederation of European Environmental Engineering Societies will take place on Tuesday 18th October
2016 at VALEO, 8 Rue Louis Lormand, 78321 La Verriére, France. Meetings of the three CEEES Technical Advisory Boards will occur in
the morning followed by the General Assembly meeting in the afternoon.
On Wednesday 19th October 2016, ASTE, the French National Society, are hosting a CEEES workshop "Methods for tailoring environmental". This will be held at Hotel Mercure Paris 15 Porte de Versailles. The programme for the CEEES workshop is planned as follows;
9:00 Attendees reception,
9:30 Introduction to the workshop by Paul-Eric DUPUIS, the ASTE President,
9:35 CEEES presentation by David DELAUX the CEEES President,
9:45 Presentations of mechanical environmental test specification software: - Fatigue Damage Spectrum by Frédéric KIHM, Bram CORNELIS and Etienne CAVRO.
11:15 Highlights of the Updated UK Environmental Test Standard Def Stan 00-35 by David RICHARDS,
11:45 How test programs and methods evolve and how to deal with that? By Harry ROOSSIEN,
14:00 AFNOR NFX 50144-1 to 6 by Nicole NAHON, Annick GALPIN, Pascal LELAN, Bruno COLIN, Laurent CAZENAVE and Alexis BANVILLET,
15:45 Mechanical Round Robin progress by Bernard COLOMIES and Henri GRZESKOWIAK,
16:15 Climatic Round Robin progress by Thierry MAROT,
16:45 Discussion and workshop conclusion lead by David DELAUX, CEEES President,
19:30 Gala dinner (Paris).
On Thursday, 20th October 2016 the ASTE are also hosting ASTELAB "Innovation enhancing the mechanical Environmental Engineering". This will also be at Hotel Mercure Paris 15 Porte de Versailles. The programme for the ASTELAB is planned as follows;
9:00 Session 1: Measurement and test facilities
Measurement by stereo image correlation by Carole TREFFOT and Floriane SOULAS,
Design and Selection Criteria of high temperature Accelerometers for Aerospace by Philippe BRIQUET,
Measurement efforts on the screw assembly by Jean-Philippe GODIN
Qualification of a vibration fatigue bench for metallic specimens by Leila KHALIJ,
DFAX - Direct Field Acoustic Excitation Using Loudspeakers and Narrow Band MIMO Random control for Acoustic Qualification Testing of Components for Space Applications by Raphaël HALLEZ and, Alex CARRELLA,
14:00 Session 2: Special tests and analyze
Feasibility of multi-axis vibration missile equipment. What interest for missiles? by Anthony FOUCHARD,
BIG DATA management of important data Vibration Constraints in an aero engine manufacturer by Christophe MARCADE,
Transient test specification from the analysis of coupled satellite and launcher with a new shock synthesis technique by Christian LALANNE and Etienne CAVRO.
A copy of the CEEES / ASTELAB programme can be downloaded here: (program CEEES_ASTE.pdf)
A copy of the registration form can be downloaded here: (Registration Form Meeting.doc)
A registration form for Hotel Mercure Paris 15 Porte de Versailles can be downloaded here: (Hotel Mercure Paris Booking Form.pdf). Whilst a list of other hotels can be downloaded here: (Hotel list Paris.doc)
The Confederation of European Environmental Engineering Societies (CEEES) is holding its 2016 Spring meeting at
the Crowne Plaza Hotel in Brugge Belgium on Thursday 3rd March 2016. The meetings of the three Technical Advisory Boards
(Reliability & ESS, Mechanical Environment as well as Climatic and Air Pollution Effects) will occur in the
morning and the CEEES General Assembly will occur in the Afternoon. The day will end with a Guided Walking Tour of
"Unknown Bruges", followed by dinner.
On Friday 4th March 2016, the Belgian Society of Testing and Environmental Engineering (BSTEE) and The Confederation of European Environmental Engineering Societies are holding a morning seminar on "Validation of Modelling for Safety Functions and Virtual Testing".
The seminar will be held at Crowne Plaza Hotel, Burg 10, Brugge. The seminar programme comprises:
Session 1: A Systematic Methodology for Model-Based Safety and its Validation
09.15 Introduction by D. Pissoort, KU Leuven, Technology Campus Oostende
09.20 A systematic methodology to validate reliability and functional safety of systems, Abdel Bey Temsamani, Flanders Make
09.15 Model-based functional safety concept - Bert Dexters, Flanders Make
10.10 Towards a model-based functional safety verification and validation, Bjorn Aelvoet, Dana Spicer Off Highway
Session 2: Testing for Design
11.00 Introduction by D. Pissoort, KU Leuven, Technology Campus Oostende
11.05 From virtual to physical testing to de-risk, Alex Carrella, Siemens Intl
11.30 A virtual shaker testing approach using multi-sign signals - Jonathan Martino, RMS
11.55 Advanced dynamic testing, KU Leuven Dynamics & Mechatronics, Daniele Brandolisio, KU Leuven, Dept. of Mechanical Engineering
12.20 Questions and closing of the seminar
The Confederation of European Environmental Engineering Societies (CEEES) is to holds its 2015 autumn meeting at
the Congress Centrum University in Naples, Italy. The hosts for the meeting are the University of Naples, who along with the
Gesellschaft für Umweltsimulation (the German National Society GUS), are arranging, at the same location, both the
CEEES meeting and the 7th European Weathering Symposium - Natural and Artificial Ageing of Polymers.
The three CEEES Technical Advisory Boards (TABs) will meet in the afternoon of the 15th September 2015. The 64th CEEES General Assembly will be held on the morning of the 16th September 2015. The meeting will be chaired by Dr Thomas Reichert the current CEEES President representing the Gesellschaft für Umweltsimulation (the German National Society).
The CEEES Spring Meeting is to be held at the Fraunhofer Forum, Berlin on Wednesday 18th February 2015. The three CEEES Technical Advisory Boards (Reliability & ESS, Mechanical Environment and Climatic & Air pollution Effects) will meet in the morning and early afternoon (between 10:00 hrs and 15:00 hrs with a lunch break at 12:30 hrs). The CEEES General Assembly Meeting will commence at 15:30 hrs and is expected to finish at 17:30 hrs. Following the General Assembly Meeting the CEEES dinner is planned to start at 20:00 hrs.
The Fraunhofer Forum, Berlin is located at Spree Palais, Anna-Louise-Karsch-Str. 2, 10178 Berlin.
For Information and registration for the CEEES Spring meeting download below.
Following the spring meeting the CEEES delegates are invited to the Innotesting Conference: "Integrated
Modelling and Testing in a Global Environment" to be held on
Thursday 19th February 2015 and Friday 20th February 2015 at Zentrum für Luft und Raumfahrt Schönefelder Kreuz, Schmiedestraße 2 15745 Wildau (Berlin).
The program is available under: http://www.innotesting.com
To CEEES Delegates the conference fee (Thursday, 19th February) is € 100 which represents a reduced rate for CEEES Delegates and includes shuttle transport from Hotel to conference venue.
The Fall Meeting of the Confederation of European Environmental Engineering Societies will take place at Fraunhofer ICT, Joseph-von-Fraunhofer-Str. 7, 76327 Pfinztal, Germany
The meetings of the three CEEES Technical Advisory Boards (Reliability & ESS, Mechanical Environment and Climatic & Air pollution Effects) will take place in the afternoon of Wednesday, 17th September 2014 starting at 1:00 pm (13:00 hrs). These meetings will be followed, at 17:20 hrs, by a special Guided Tour of the Fraunhofer ICT facilities and a reception at 18:30 pm. The CEEES General Assembly will be in the morning of Friday 19th September 2014 starting at 9:00 am at the same location. At this General Assembly the Presidency of CEEES will be formally transferred from Harry Roossien, of the Netherlands national society (PLOT), to Thomas Reichert of the German national society (GUS). Registration for the CEEES meeting can be made by downloading Registration Form
The CEEES Conference on "Environmental Testing and Safety of Batteries and Fuel-Cells" is to be held at Fraunhofer ICT, on Thursday, 18th September 2014 starting at 9.30 am. The Conference is expected to finish at 17.30 hrs and will be followed by a CEEES Delegates Dinner starting at 20.00 hrs. The CEEES Conference will include sessions on; Battery safety and regulations, Environmental testing and safety behaviour of fuel cells, Environmental testing and safety behaviour of batteries (2 sessions), Evaluation of critical parameters of battery cells as well as Modelling and simulation of safety behaviour. For Information and registration for the CEEES Conference download Here
The spring Meeting of the Confederation of European Environmental Engineering Societies will take place at LMS International, Interleuvenlaan, 68, B-3001 Leuven, Belgium.
The meetings of the three CEEES Technical Advisory Boards (TABs), will take place in the morning of Thursday, 27th February 2014 starting at 9.00 am. The CEEES General Assembly will be in the afternoon (13:30 hrs) of the same day and at the same location. These meetings will be followed by a Dinner and special Guided Tour (18.30hrs).
The CEEES meeting will be followed by a Technical Conference ETE'2014 starting at 09.00hrs on Friday, 28th February 2014 meeting at at LMS International, Interleuvenlaan, 68, B-3001 Leuven, Belgium.
The Fall Meeting of the Confederation of European Environmental Engineering Societies will take place at the Park Inn Danube Hotel, Bratislava, Slovak Republic.
The meetings of the three CEEES Technical Advisory Boards (TABs), will take place in the afternoon of Tuesday, 10st September 2013 starting at 14.00 at the Hotel Park Inn Danube. These meetings will be followed by a Dinner and special Guided Tour (18.30hrs).
The CEEES General Assembly will be in the morning (09.00 - 13.00) of Wednesday, 11th September 2013 again at the Hotel Park Inn Danube.
A European Weathering Symposium Training Course will occur in the afternoon (14.00 - 17.00). The training course is on Chemiluminescence and FT-IR Spectroscopy for Polymer Analytics
The 6th European Weathering Symposium will occur from Thursday, 12th to Friday, 13th September 2013. Sessions at the Symposium include; comparison of outdoor and artificial exposure, influence of irradiance and wavelength, influence of moisture and soil, analysis of weathering results and UV-data, analysis of weathering results, ageing of photovoltaic cells and poster presentations.
The 58th Meeting of CEEES and Symposium will take place on 18th to 19th October 2012 in Rotterdam, Netherlands. The meeting will the CEEES General assembly and its three Technical Advisory Boards will take place on the 19th October 2012. The Technical Advisory Boards will be meeting in the morning, with the CEEES plenary meeting in the afternoon.
A seminar on Reliability and Environmental Testing will take place on the 18th October 2012 at the RDM campus Rotterdam, Netherlands.
To be held at Maritim Hotel, Nürnberg on 9th & 10th May 2012
This GUS organised symposium will present and discuss issues related to different approaches, strategies and technologies related to the product qualification process. The symposium will examined how environmental influences must be considered during product development in order to ensure sustainable and reliability products, to ensure satisfied customer.
The characterization of materials and products plays a significant role in the assessment of the of the product quality. The symposium will address how environmental influences must be measured and subsequently reproduced under controlled conditions. In order to undertake a comprehensive assessment of the effects of the environment on the product, as well as the products effect on the environment.
Product qualification and associated environmental simulation has an interdisciplinary character. As such this symposium is intended to be a communication and discussion platform for partners from a wide variety of industries. It will focus on the scientific and technical associated with product qualification. It is designed to help people from industry, research and development and the application to bring together.
56th Meeting of CEEES and Symposium
The 56th Meeting of CEEES and Symposium will take place on 4th to 6th October 2011 in Vienna Austria. The meeting will the CEEES General assembly and its three Technical Advisory Boards will take place on the 5th October 2011 at Hotel am Konzerthaus, 1030 Wien, Am Heumarkt 35-37, Vienna, Austria. The meeting will be followed by a Vintage Tram Ride along Ringstrasse followed by Dinner in Hotel Sacher.
A syosium "Innovative Faser-Kunststoff-Verbunde“ will take place on the 6th October 2011 also at Hotel am Konzerthaus (note the Presentations will be in German or English without translation).
Prior to the CEEES General assembly, a Bestproduct meeting will occur on the 4th October 2011 again at Hotel am Konzerthaus. This will be followed by a social event.
17th February 2011 > CEEES 55th Meeting.
The 55th meeting of CEEES and its Technical Advisory Boards will occur on the 17th February 2011. The Technical Advisory Boards will be meeting in the morning, with the CEEES plenary meeting in the afternoon. A dinner will follow in the evening. The meeting will be held in Mechelen Belgium at the Novotel Mechelen Centrum.
18th February 2011 > ETE'2011 Technical Workshop
The ETE'2011 Environmental Engineering International Technical Workshop will occur on the 18th February 2011 at the Denayer Product Certification Center, Mechelen Belgium. The workshop is entitled "BESTPRODUCT: Progress in Testing for more Reliability, more Sustainability and more Safety.'
Please find attached the official Call for Papers for
the 3rd EFCA Symposium on Ultrafine Particles, planned for 26 and 27 May 2011 in Brussels.
The Call for Papers will be open till 31 January 2011. The symposium is hosted by the Karlsruhe Institute for Technology (KIT), in narrow cooperation with GUS and CEEES.
Please find attached once again the "Announcement and Call for Papers" for the
5th European Weathering Symposium EWS
on 21 – 23 September 2011 in Lisbon, Portugal
The Registration Form, the Hotel Booking and a Abstract Model are attached.
Deadline for submission of abstracts is 15 January, 2011.
The EWS is being organised on behalf of CEEES by GUS and supoorted by SOPSAR, APIP and LNC from Portugal.
11-12th February;> 53rd CEEES General Assembly & TAB Meetings
Royal Military Academy, rue Hobbema, 8 1000 Brussels, Belgium
6th-8th October; 54th CEEES General Assembly & TAB Meetings.
The 54th Meeting of CEEES will occur on the Thursday 7h October 2010 at Interlaken Switzerland. The meeting is arranged by the Swiss National Society who will also be hosting a workshop on the Friday 8th October 2010. Meetings on TENEEST / EUREKA will occur on the 6th October 2010 at the same location.
15-16th February; 51st CEEES General Assembly & TAB Meetings, Brussels, Belgium
7th to 8th May 2009; Second EUREKA Symposium on Environmental Testing Engineering
Towards an information exchange between Academy and Industry,
Royal Military Academy, Brussels, Belgium.
19th to 20th May 2009; EFCA International Symposium
Ultrafine Particles - Sources, Effects, Risks, Mitigation Strategies,
Landesvertretung des Freistaates Bayern, Brussels Belgium.
In Cooperation with Forschungszentrum Karlsruhe and CEEES.
28th May 2009; ÖGUS Conference on Corrosion & Corrosion protection
Mechanisms - Preventive measures – Examination.
At the orschungsinstitut for chemistry and technology (OFI) in Vienna, Austria
16th to 18th September 2009; 4th European Weathering Symposium
EWS Budapest, Hungary
24th to 25th September 2009; 52nd CEEES Meeting / 1st SOPSAR Congress - Innovative Environmental Testing: A Supporting
Tool for Sustainable Renewable Energies.
26-27 November 2009, Second EUREKA International Symposium On Environmental Testing Engineering. “Towards An Information
Exchange Between Academy And Industry”
Royal Military Academy, Brussels, Belgium.
14-15th February; 49th CEEES General Assembly & TAB Meetings, Brussels, Belgium
25th September; 50th CEEES General Assembly & TAB Meetings, VTT, Helsinki, Finland
26th September; Management of Verified Environmental Stresses, Vantaa, Finland.
15-16th February; 47th CEEES General Assembly & TAB Meetings, Oostend, Belgium
16th February; CEEES Conference "Highly Accelerated Lifetime Testing", Oostend, Belgium
11-12th June; 18th EFCA International Symposium on Ultrafine Particles, Forschungszentrum Karlsruhe FZK, Germany
12-14 September; 3rd European Weathering Symposium EWS, Kraków, Poland
27th September; PLOT Conference 2007 'Environmental Testing of the Future' ESTEC/ESA&, Noordwijk, The Netherlands.
28th September; 48th CEEES General Assembly & TAB Meetings, Hotel Mercure, Noordwijk, The Netherlands
15-16th February; First CEEES/EUREKA conference for the planning of projects under network FACTORY: BESTPRODUCT-TENEEST, EU!3517 in Brussels, Belgium
16-17th February; 45th CEEES General Assembly & TAB Meetings, Oostend, Belgium
7-10 May; ESTECH 2006, Phoenix
12-14 September; 3rd European Weathering Symposium EWS, Kraków, Poland
21st September; 46th CEEES General Assembly & TAB Meetings, Holiday Inn, London Heathrow
22nd September; CEEES/SEE Seminar on Life Assessment and Extension, Holiday Inn, London Heathrow
7-19 Oct; Le COLLOQUE ASTELAB 2006, Paris-Expo, Porte de Versailles
17th February; 43rd CEEES General Assembly & TAB Meetings, Baden-Würtenberg Representation to EU, Brussels, Belgium
18th February; CEEES Workshop - Twenty Years of Tailoring in Environmental Testing, Baden-Würtenberg Representation to EU, Brussels
24th October; 44th 43rd CEEES General Assembly & TAB Meetings, NOVOTEL Hotel Les Halles, Paris, France.
25th October; ASTE CEEES Workshop, International Standardization, CNIT Le DEFENS, Paris, France.
3rd November; 2nd CEEES Workshop on Biodegradable Polymers - Where Are the Limits?